Tislamid® 6

Tislamid® 6 is the registered trade mark for Polyamide 6 compounds produced by Tisan.
Tislamid® 6 ensures a high impact resistance and excellent mechanical properties of the material. Combining mineral fillers and glass fiber in production has proved to be a highly successful development. It results in valuable material properties like extreme rigidity and stiffness, high dimensional stability and minimal warpage. These qualities are most important when manufacturing large surface area.

 

Tislamid® 6 product family includes a wide range of viscosity number and glass fiber reinforced, UV / light resistant, impact modified, laser markable, heat-stabilised, mineral filled, flame-retarded various type of additives.
Tislamid® 6, formulations can also be developed to meet specific market needs.
Tislamid® 6 is a fully recyclable material and it can be reused after regrinding.
The user shall always verify that the compound obtained by mixing virgin and reground material is suitable for the specific application and that its properties meet the requirements.
Tislamid® 6 grades can be provided fully colored in customized colors with narrow color specificationsc colorability even in light colors.


Main specifications

Modification of PA6 by compounding with glass fiber, mineral fillers and other modifying additives produces a substantial change in the properties of the base material and gives to compositions based on Tislamid® 6 the following properties:
High stiffness, strength and temperature resistance, excellent impact resistance and toughness at low and high temperatures, high dynamic strength, very good abrasion resistance, hydrolytic stability (special grades), excellent chemical resistance, highest stress resistance, even at cold temperatures, high wear and fatigue resistance even at high temperatures, good electrical properties, easy processability. Flame retardant compound with halogen and halogen free, UL94 V-2 or V-0 classifications (UL approved grades), glow wire flammability index, glow wire ignition behavior (no flame), low smoke density and toxicity.


Fillers / reinforcements / modifiers

Glass fibers-glass beads-carbon fibers-aramid fibers-mineral fillers are available with varying contents in different combinations. And also filled materials containing PTFE and molybdenum disulphide are available for bearing materials with appropriately low friction and improved wear. Heat stabilizers-hydrolysis stabilizers-lubricants-UV stabilizers, electrical conductive etc. are being used in non-reinforced and reinforced grades to increase specific material properties.

 A UNR GH011-1 R01 PA6, unfilled, natural PDF Görüntüle
 A UNR GH011-2 R01 PA6, unfilled, natural PDF Görüntüle
 A K041 R01 PA6, impact modified, natural, low impact PDF Görüntüle
 A K042 R01 PA6, impact modified, natural, medium impact PDF Görüntüle
 A 043 R02 PA6, impact modified, natural,high impact PDF Görüntüle
 A K04 R02 PA6, impact modified, black PDF Görüntüle
 A UNR K05 PA6, unfilled, MoS2; modified PDF Görüntüle
 A UNR K07 R02 PA6, unfilled, conductive black PDF Görüntüle
 A 25D01 K04 R01 PA6, 25% mineral reinforced, impact modified, natural PDF Görüntüle
 A 30D01 K02 R02 PA6, 30% mineral filled, heat stabilized, black PDF Görüntüle
 A 40D03D01 R01 PA6, 40% glass fiber / mineral reinforced, natural PDF Görüntüle
 A 30D05 R01 PA6, 30% glass bead reinforced, natural PDF Görüntüle
 A 30D03D05 R01 PA6, 30% glass fiber / glass bead reinforced, natural PDF Görüntüle
 A 10D03 R01 PA6, 10% glass fiber reinforced, natural PDF Görüntüle
 A 30D03 R01 PA6, 30% glass fiber reinforced, natural PDF Görüntüle
 A 15D03 K04 K02 R01 PA6, 15% glass fiber reinforced, impact modified, heat stabilized, natural PDF Görüntüle
 A 20D03 R01 PA6, 20% glass fiber reinforced, natura PDF Görüntüle
 A 25D03 R01 PA6, 25% glass fiber reinforced, natural PDF Görüntüle
 A 25D03 R02 PA6, 25% glass fiber reinforced, black PDF Görüntüle
 A 30D03 K04 R01 PA6, 30% glass fiber reinforced, impact modified, natural PDF Görüntüle
 A 30D03 K06 R01 PA6, 30% glass fiber reinforced, hydrolysis stabilized, natural PDF Görüntüle
 A 30D03 K04 K01 R01 PA6, 30% glass fiber reinforced, impact modified, heat stabilized, natural PDF Görüntüle
 A 50D03 K04 R01 PA6, 50% glass fiber reinforced, impact modified, natural PDF Görüntüle
 A 50D03 K03 R02 PA6, 10% carbon fiber reinforced, black PDF Görüntüle
 A 10D11 R02 PA6, 20% carbon fiber reinforced, black PDF Görüntüle
 A 20D11 R02 PA6, 30% carbon fiber reinforced, black PDF Görüntüle
 A 30D11 R02 PA6, 30% carbon fiber reinforced, black PDF Görüntüle
 A 20D12 K02 R01 PA6, 20% aramide fiber reinforced, heat stabilized, natural PDF Görüntüle
 A UNR F02 Y03 HS R01 PA6, unfilled, flame retardant-halogen, natural PDF Görüntüle
 A UNR F01 Y03 HS R01 PA6, unfilled, flame retardant-halogen, natural PDF Görüntüle
 A UNR F02 Y01 R01 PA6, unfilled, flame retardant-halogen, natural PDF Görüntüle
 A UNR F01 Y01 HS R01 PA6, unfilled, flame retardant-halogen free, natural PDF Görüntüle
 A 15D03 K02 F01 Y01 HS R01 PA6, unfilled, flame retardant-halogen natural PDF Görüntüle
 A UNR K02 K043 F01 Y01 HS R10 PA6, unreinforced, flame retardant-halogenated(rohs compliance), high-impact heat stabilized, black PDF Görüntüle
 A 20D03 K02 F02 HS R01 PA6, 15% glass fiber reinforced, flame retardant-halogen heat stabilized, natural PDF Görüntüle
 A 15D03 F01 HS R01 PA6, 20% glass fiber reinforced, flame retardant-halogen free, heat stabilized, natural PDF Görüntüle
 A 30D03 K02 F01 Y01 HS R01 PA6, 30% glass fiber reinforced, flame retardant-halogen heat stabilized, natural PDF Görüntüle
Main specifications

Modification of PA6 by compounding with glass fiber, mineral fillers and other modifying additives produces a substantial change in the properties of the base material and gives to compositions based on Tislamid® 6 the following properties:

  • High stiffness,
  • Strength and temperature resistance,
  • Excellent impact resistance and toughness at low and high temperatures,
  • High dynamic strength,
  • Very good abrasion resistance,
  • Hydrolytic stability (special grades),
  • Excellent chemical resistance,
  • Highest stress resistance,
  • Even at cold temperatures,
  • High wear and fatigue resistance even at high temperatures,
  • Good electrical properties, easy processability.
  • Flame retardant compound with halogen and halogen free,
  • UL94 V-2 or V-0 classifications (UL approved grades),
  • Glow wire flammability index,
  • Glow wire ignition behavior (no flame),
  • Low smoke density and toxicity.
Fillers / reinforcements / modifiers

 

Glass fibers-glass beads-carbon fibers-aramid fibers-mineral fillers are available with varying contents in different combinations. And also filled materials containing PTFE and molybdenum disulphide are available for bearing materials with appropriately low friction and improved wear.

Heat stabilizers-hydrolysis stabilizers-lubricants-UV stabilizers, electrical conductive etc. are being used in non-reinforced and reinforced grades to increase specific material properties.

Application Areas

Tislamid 6 finds itself in the area of application in many sectors. Some of these sectors are listed below.

  • Electric / Electronix
  • Automotive Construction
  • Mexhanical Engineering
  • Construction
  • Household & Optic
  • Sport & Leisure
  • Others
Packing and Storage

Tislamid® 6 are supplied in pellet form in moisture-proof 25 kg aluminum layer bags. Other forms of packing like octabins and big-bags with PE or aluminum in-liners are also available. During storage the material should be keep away from moisture and heat. A dry storage room or area is recommended, also sacks are used to protect the material from damage. Damaged material or ripped sacks should be closed tightly or transferred to metal containers and in some cases, drying may be necessary before use.

Acid Dilute Acids Concentrated Alkalis Alcohols Aromatic Hydrocarbon Oils and Grases Halogenated Hydrocarbon Ketones
Poor Poor Good-fair Good Good Good Good-Poor Good
Injection Process Temperatures of Tislamid® 6
Predrying Tempereature 80 – 110 C
Predrying Time 3-4 saat
Maximum Moisture %0.2
Melting Temperature 230-250 C
Nozzle Temperature 210-230 C
Pre-3 Region Temprature 240-260 C
Mid-2 Region Temperature 240-260 C
Aft-1 Region Temperature 240-260 C
Mold Temperature 50-90 C
Back Pressure 50-100 MPa